JL Audio 75 watts 1" Car Speaker (C3-100ct)

JL AudioSKU: C3-100ct

Price:
$159.95

Description

1-inch (25 mm) Silk Dome Tweeters

The silk dome tweeter is prized by audiophiles for delivering realistic, non-fatiguing, high-frequency performance.

The C3 component tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be installed coaxially onto the C3 woofers using the fixtures included with the C3 Component / Coaxial Systems.

Inline 12 dB / octave high-pass filters with tweeter protectors are included with this kit. The C3-100ct is designed to operate above 4 kHz with a minimum high-pass slope of 12 dB / octave.

Sonic character: Clean and Powerful

Sold as a pair.

Silk Dome Tweeter

Summary:
Light, fast moving silk dome material promotes high-frequency accuracy. 

Detailed Information:
Silk is a natural material with inherently good characteristics as a tweeter diaphragm. In addition to being very light in weight, silk exhibits excellent damping properties, which reduces ringing and resonances in the tweeter’s passband, leading to a smooth, pleasing high-frequency character free from unnatural sibilance or exaggerated brightness. Compared to a harder material dome, a silk tweeter does not exhibit as much ultra-high frequency extension, but is preferred by many audiophiles for its overall balance.

 

General Specifications
Continuous Power Handling (RMS) - 75 W
Recommended Amplifier Power (RMS) - 25 - 150 W / Ch.
System Efficiency - 90.0 dB @ 1 W / 1 m
System Nominal Impedance - 4 Ω
System Frequency Response - 4 kHz - 25 KHz ± 3 dB
*With supplied crossover

Tweeter Physical Specifications
Flush Mount Fixture Diameter (A1) - 2.12 in / 54 mm
Surface Mount Fixture Diameter (A2) - 1.93 in / 49 mm
Flush Mount Mounting Hole Diameter (B) - 1.875 in / 48 mm
Flush Mount Mounting Depth (C) - 0.71 in / 18.0 mm
Flush Mount Tweeter Frontal Protrusion (D1) - 0.32 in / 8 mm
Surface Mount Tweeter Frontal Protrusion (D2) - 0.95 in / 24 mm

 

Have Questions About This Product? Message us here or:

Email Us At: info@teamiu.com

Call Us At: 315-458-5000

Estimate shipping

You may also like

Recently viewed