PRV Audio 10MR1000X 10" Midrange Speaker 8ohm

Save $70
PRV AudioSKU: 10MR1000X

$189.95 $259.95



X-treme mid range performance is what PRV Audio’s 10MR1000X is all about. The PRV Audio 10MR1000X is the evolution of our line, after intense 2 years of development we have created the mid range loudspeaker that offers outstanding durability. This specially designed loudspeaker is assembled with top of the line components for long lasting play, even during intense use.



  • 3″ Inside/Out aluminum voice coil wound on fiberglass former for hi-temp performance, 8 ohms
  • 1,000 watts continuous program power rating makes high acoustical output
  • Excellent performance in compact enclosures
  • 100 dB sensitivity, which makes it capable of generating a lot of output!
  • Detailed vocal reproduction, high fidelity response


A coated woven surround offers smooth, precise geometry during hard play. The light weight cone provides excellent linear response up to 3 kHz, making the 10MR1000X a great solution for high quality two or three-way systems.


Extreme car audio enthusiasts will find PRV Audio’s 10MR1000X to be the perfect 10? mid range door speaker, capable of handling up to 500 watts RMS power (with a suggested 140 Hz, 18 dB/octave high pass filter in place)! The large magnet assembly is attached to a sturdy, reinforced cast-aluminum frame.

High power handling at sensitivity rating of 100 dB 1W/1M which makes it capable of generating a lot of output!

RK10MR1000X Website Highlight

The 3″ inside/outside copper voice coil is wrapped on a glass fiber former for heat resistance and high efficiency, while providing smooth and accurate response. Not only can it handle the force of 500 watts RMS, it does so while remaining linear from 300 to 3,000 Hz. 



Nominal Diameter 10″ (254 mm)
Nominal impedance 8 Ohms
Rated AES Power Handling (RMS) 500 Watts
Program Power 1000 Watts
Sensitivity 2.83V at 1m 100 dB
Recommended Hi Pass Crossover**
**For Full Power Handling
150 Hz**
**12db Per Octave Crossover
Frequency Response at -10dB 75 – 6,500 Hz
Voice Coil Diameter 3″ (76 mm)
Voice Coil Wire Copper
Voice Coil Winding Depth 9.0 mm
Former Material Glass Fiber
Magnetic Gap Depth 8.0 mm
Frame Material Die Cast Aluminum



Equivalent Volume Vas 28.68 l
Excursion (mathematical)*** Xmax 2.50 mm
Free Air Resonance Fs 72.02 Hz
Mechanical Factor Qms 11.22
Electrical Factor Qes 0.23
Total Factor Qts 0.22
Cone Area Sd 391 cm²
Mechanical Mass Mms 36.26 g
Bl Factor Bl 19.42 Tm
Dc Resistance Re 5.2 Ohms
Inductance Le 0.43 mH at 1 kHz
Mechanical Mass Without Air Mmd 31.89 g
Mechanical Compliance Cms 0.134 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4


Overall Diameter 10.23” (260 mm)
Front Mount Baffle Cutout 9.01” (229 mm)
Mounting Depth 4.27” (108.5 mm)
Overall Depth 4.84” (123 mm)
Net Weight 15.43 Lbs (7.0 kg)
Shipping Weight 16.53 Lbs (7.5 kg)
Carton Dimensions W x L x H 11.22” x 11.22” x 6.89”
(285 x 285 x 175 mm)


Recommended Products

Verify fitment with your vehicle


(Change vehicle)