Hertz Marine SPL Show S8 DSP Compact Digital Interface Processor 6 in + digital in & 8 outputs

HertzSKU: S8 DSP

Price:
$399.99

Description

Hertz S8 DSP is the perfect solution for integrating any OEM system to your car, motorcycle, and boat! A distilled essence of technology at the service of the highest audio quality in a corrosion-free case cast in metal and composite materials

The S8 DSP process has obtained the HI-Res certification from the Japan Audio Society – which acknowledges the extreme level of audio performance achieved. 

The 32-bit DSP offers maximum freedom of configuration to the specialist through the 6 high/low-level analog input channels, one digital coaxial input, and 8 output channels. The SPDIF coaxial input is best for digital connection with Hi-Res player, a solution that allows for maximum listening quality. For every one of the eight output channels we have a level of control, the 15-pol parametric equalizer, time delays, and crossover filter available. The 7-band parametric equalizer of the input signal allows obtaining a flat response from OEM sources, which often have an exaggerated emphasis on the low frequency. 

Power Supply:

Nominal power supply voltage / fuse:  7÷20 VDC / 1A
Pulse operating voltage:  5÷24 VDC
Idling Current: 0.34 A
Remote IN: 6÷ 20 VDC (10 mA)
Remote OUT: 4÷ 20 VDC (150 mA)

 

Signal Stage:

Distortion – THD @ 1 kHz, 1 VRMS Output: 0.004%
Bandwith @ -3 dB: 10 Hz ÷ 40 kHz
S/N ratio @ A weighted, 4 V Output, 1 V MASTER input:  100 dBA
S/N ratio @ A weighted, 4 V Output, DIGITAL IN input: 112 dBA
Channel Separation @ 1 kHz:  97 dBA
Input Impedance: 10 k
Max output level 0,1% THD: 4 V

 

Inputs Stage:

Low level (Pre): Ch1 ÷ Ch6;input/output matrix routing
Hi level (Speaker In): Ch1 ÷ Ch6
Digital: 1 x Coaxial S/PDIF; Max 96 kHz / 24 bit; Extra Gain +3dB, +6dB

 

Output Stage:

Low Level (Pre): Ch1 ÷ Ch8
Output Equalizer: 15 poles Paragraphic EQ

 

Connection:

From / to personal computer: 1 x micro USB
Bluetooth data connectivity (no audio): BT 5.0 (BLE)

 

Crossover:

Filter Type: Full/ Hi pass/ Low Pass / Band Pass
Filter mode and slope:

Linkwitz @ 12 / 24 dB

Butterwort @ 6/12/18/24/30 dB

Bessel @ 6/12/18/24/30 dB

Crossover Frequencies: 20 ÷ 20k Hz (120 step)
Phase Control: 0 / 180

 

General:

Memory Presets: 4 x Presets
Memory Presets Selection: Through the control software or by wire

 

Time Alignment:

Distance: 0 ÷ 471,5cm / 0 ÷ 185,5 inches
Delay: 0 ÷ 13,58 m
Step: 0,002 ms, 0,7 cm / 0,27 in

 

General Requirements:

PC Connections: 1xUSB 1,1 / 2,0 / 3,0 Compatible or Bluetooth 5.0 BLE
Minimum Mobile Device requirements: Android OS 7 or later, iOS 12 or later
Video Resolution with screen resize: min 1024 x 600
 

Estimate shipping

Recommended Products

Verify fitment with your vehicle

Search

(Change vehicle)