Description
The TS-A3000LB features a compact, space-saving enclosure designed for optimal use of space. The carpeted enclosure is shallow enough for mounting in a wide variety of vehicles including pickup trucks with standard or extended-cab models. The enclosure’s unique design allows it to be mounted upright or lying flat, facing upwards or configured in a down-fire position. The enclosure is fully carpeted with an embroidered Pioneer Logo, creating a non-slip and scratch resistant surface.
- 1,500 W Max / 400 W RMS
- 2 ohm Single Voice Coil
- Glass Fiber and a Mica Interlaced IMPP™ Cone
- Butyl Rubber Surround
- Fully Covered Steel Mesh Grille
- Removable Feet & Cushions
- Carpeted Enclosure with Embroidered Logo
Subwoofer Firing Options
This subwoofer features a full grille and down-firing structure for cone protection and can be installed inside your vehicle's interior. It's designed with the flexibility to be installed in three different ways. The provided feet can be screwed onto the bottom or top using the pre-drilled holes. Cushions on the feet prevent sliding.
Down-fire –With the four feet installed to the bottom of the subwoofer to allow space between the cone and the floor, it will push the soundwaves towards the floor where they are reflected to deliver a richer sound for a stronger “rumble” effect.
Up-fire –This option allows you to place the subwoofer with the cone facing upward. It can use the provided feet to prevent sliding. Firing the sub upwards moves more cabin air to deliver a stronger, more crisp sounding bass.
Vertical-Facing – This option allows you to place the subwoofer with the cone facing on its side. It can use the provided feet to prevent sliding. This position will disperse sound like conventional loudspeakers producing fast and impactful bass, hitting the ear before being reflected off a surface which can lead to an especially precise and punchy sound.
Angled Subwoofer Terminals
Traditional subwoofer terminals are mounted horizontally or vertically. These mounts force wires to be bent to fit which can be difficult if low gauge high performance wires are used. The Pioneer shallow subwoofer’s angled binding-post terminals make it easy to connect speaker wires, saves space, and makes installation easier. Two metal angle-brackets and eight 1" screws are provided for mounting the enclosure to a trunk or rear compartment floor in an upright fashion. Four screw-on feet also allow the enclosure to be mounted flat under a seat in a down-firing configuration.
Bass Driver
The TS-A3000LB features a single 12” driver made with a glass fiber and a mica interlaced, injection molded polypropylene (IMPP) cone with butyl rubber surround, mounted in a shallow sealed enclosure.
In-Car Simulator
Pioneer’s CarSoundFit app is a car sound simulator for experiencing in-car sound with your own smartphone. Hear the difference between original car speakers and different Pioneer audio upgrades: convince yourself of the level of quality Pioneer can offer for your vehicle. For a virtual listening demonstration of these and many other Pioneer car speakers, download the free Pioneer CarSoundFit app on the Apple® App Store or Google Play Store.
What’s in the Box
- 12" Pre-loaded subwoofer enclosure
- 2 Mounting brackets
- Four 1.75" feet
- 4 Adhesive foot cushions
- Eight 1" screws
- Installation instructions
- Warranty information
KEY FEATURES
-
Pre-Loaded
-
88dB
-
20 Hz to 1 kHz
-
Yes
-
1 Year
-
400 Watts
-
1500 Watts
-
2
-
Fully Covered Steel Mesh Grille
BUILD
-
Round
-
12"
-
IMPP - Composite
-
ABS
-
Rubber
-
Rolled
-
Stamped Metal
-
Ferrite
-
71.6 oz
-
Single Voice
-
Glass Imide
-
Copper
-
Poly cotton