Description
Compact powerhouse for the whole system
Clarion's XC2510 5-channel amplifier delivers 50 watts RMS to your front and rear speakers while sending up to 300 watts RMS to a sub, all from a chassis that's just slightly larger than your hand. This micro-sized amp can fit almost anywhere, even behind many dashboards. And Clarion managed to pack more watts per square inch inside this little powerhouse than almost any other 5-channel amp made.
Ready for outdoor work
The XC2510's circuits are coated on both sides for protection, so this amp is a great candidate for powering speakers and subs in ATVs, boats, and other challenging applications. Clarion nickel-plated all the connectors to resist corrosion and ensure electrical flow, even during harsh conditions.
Super-clean signal
The XC2510's input circuitry resists the electronic noise common in cars, so you will enjoy clean, distortion-free music. Soft turn-on and turn-off circuitry prevents potentially damaging thumps to your system as it powers on or off.
Variable high-pass filters help you clarify the sound by eliminating the extremely low bass that your speakers can't reproduce, while a low-pass filter eliminates the higher frequencies from the subwoofer to clean up your bass. A bass boost on the sub channel lets you emphasize the low-end thump. You'll also appreciate the high-level inputs, so you can hook this amp up to almost any system, even to factory radios without RCA connections.
Product highlights:
- 5-channel amplifier
- 50 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms
- 75 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
- 150 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
- CEA-2006 compliant
- Class D amp technology
- double-sided conformal-coated circuit board — suitable for power sports and marine applications (not waterproof)
- corrosion-resistant nickel-coated connections
- built-in ground loop isolation circuitry reduces input noise
- variable high-pass filters on front and rear channels (15-250 Hz, 12 dB/octave)
- variable low-pass filters on sub channel (35-250 Hz, 12 dB/octave)
- variable bass boost on sub channel (0-12 dB at 50 Hz)
- preamp and speaker-level inputs
- 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
- fuse rating: 40A x 2
- dimensions: 12-1/4"W x 1-5/8"H x 4-3/8"D
What's in the box:
- 5-Channel amplifier
- Two 40-amp ATO fuses (installed in-line)
- 9" Power/Ground harness
- 9" Speaker-level output harness
- Four 3/4" Self-tapping screws
- 4 Flat washers
- Owner's manual (English/ French/ Spanish)