Alpine MRV-V500 5-Channel Car Amplifier

ONLY 1 LEFT!
AlpineSKU: MRV-V500

Price:
$329.95

Description

Power for your whole system

Alpine makes it a little easier to get great sound in your vehicle, with their V-Power Series MRV-V500 amplifier. This 5-channel powerhouse can put out 40 watts RMS to four full-range speakers and up to 250 watts RMS to a subwoofer, and still fit into the tight spaces you find in many cars and trucks these days. You can also use this versatile amp in 3-channel mode, driving a pair of high-performance speakers with 120 watts each, while still sending 250 watts to a sub.

Thermal protection without annoying shut-downs

The MRV-V500 uses a technology called Enhanced Shutdown Performance, which rolls back the output a bit when the amp threatens to overheat from playing at its limits too long. Instead of shutting down completely, it continues playing your music, until it cools enough to return to full power.

Conveniences

High- and low-pass filters put you in command of the frequencies that reach your speakers, while a bass boost lets you apply some extra low-end punch to your subwoofer. The amp includes preamp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. If you're using the speaker-level inputs, the amp senses an incoming signal and turns itself on, eliminating the need to run a turn-on wire back to your vehicle's receiver or fuse box. If you're a tweaker, you'll appreciate the end-piece terminal covers that can be snapped in and out without the need for any tools.


Product highlights:

  • 5-channel car amplifier
  • 40 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms
  • 60 watts RMS x 4 + 250 watts RMS x 1 at 2 ohms
  • 120 watts RMS x 2 bridged at 4 ohms + 250 watts RMS x 1 at 2 ohms
  • CEA-2006 compliant
  • variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section
  • variable low-pass filter (50-400 Hz, 24 dB/octave) on sub channel
  • variable bass boost (0-12 dB at 50 Hz) on sub channel
More Features:
  • optional RUX-KNOB.2 wired remote level control for sub channel
  • preamp and speaker-level inputs
  • MOSFET power and output stages
  • fuse rating: 30A x 2
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • 9-5/8"W x 2-3/16"H x 8-11/16"D
  • warranty: 1 year
  • MFR #MRV-V500

What's in the box:

  • 5-Channel amplifier
  • Two 30 amp ATO fuses (installed)
  • 7.5" Speaker-level input harness
  • 2 Snap-on terminal covers
  • Four 3/4" Self-tapping hex-head screws
  • 2mm Allen wrench
  • 3mm Allen wrench
  • Owner's Manual (Eng/Fren/Span)
  • Alpine Verification Certificate
  • Warranty information
  • On-line product registration information

Estimate shipping

You may also like

Recently viewed