Rockford Fosgate M5-1500X5 M5 Series Marine 5-Channel Amplifier

Save $20
Rockford FosgateSKU: M5-1500X5

Price:
$929.95 $949.95

Description

M5-1500X5

The M5-1500X5 amplifier features the next level of Element Ready™ design from Rockford Fosgate that’s built as rugged as the outdoor environment it’s used in. The IPX6 rating is provided by splash guards on both ends and heavy-duty molded harnesses with integral sealing gaskets. A new PRESET switch - for use with Rockford Fosgate UTV audio kits - eliminates the need to set-up and tune the amp for the best experience possible. Built on the popular TM series, M5 amplifiers feature the same great technologies like Constant Power, Class-AD/BD and C.L.E.A.N., all engineered, developed, and validated in Tempe, Arizona.

Rockford Fosgate amplifiers are known world-wide for producing more power than their ratings suggest. The M5 amplifiers are the first series based on new industry standard Dynamic Power ratings, bringing their conservative ratings to the forefront. Engineered from the ground up and purpose-built to deliver more output where you actually hear it, this is real dynamic power that performs not only on paper, but performance heard through the musical experience. You’ll see two amplifier power ratings, the traditional Continuous Power output, and the new Dynamic Power output, both tested in accordance with the CTA-2006 specification. Consider Continuous Power as wattage developed on the test bench for comparison against other amplifiers in the same class, and Dynamic Power as real-world wattage when connected to a speaker load, listening to music. Either way you look at it, Rockford Fosgate is proving – once again – these amplifiers are powerful enough to drive any speaker or subwoofer you throw at them.

 

  • Element Ready™ design with integrated harness & panel seals
  • PRESET removes the need to set-up and tune the amp when used with Rockford Fosgate UTV audio kits
  • Play all day, easy to integrate, and keep music playing for extended lengths of time
  • C.L.E.A.N. input/output clip detection and indicator LEDs
  • Constant Power provides instantaneous delivery of output over varying impedance loads
  • Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
  • Top mounted control panel with Element Ready™ smoked lens cover
  • OEM and aftermarket radio integration inputs
  • Low Impedance Stability
  • Proprietary testing using RATS (Rockford Automated Testing System)
  • Proprietary Class-AD technology allows amplifier to produce more power with less current draw
  • Class-BD technology provides 75-80% efficiency over traditional class A/B designs
  • Discrete Surface Mount technology utilizes 1% tight-tolerances for high efficiency and reduced cross-talk
  • MESHA 4 reduces MOSFET temps, lowers distortion, increases durability and prolongs device life span
  • Chassis Isolation from mounting points greatly reduces possible introduction of vehicle noise
  • Balanced Differential Inputs eliminates noise picked up by signal cables
  • Remote-Out feature when using high level inputs
  • 2-Year Warranty

 

CEA-2006 Compliant
Yes


Total Power
(Sum of Rated Power)
1500 Watts


Rated Power
(RMS Continuous Power)
CTA-2006 Guidelines
CTA-2006 Continuous Power Rating
100W x 4 + 400W x 1 @ 4Ω
100W x 4 + 600W x 1 @ 2Ω
N/A + 600W x 1 @ 1Ω
200W x 2 + N/A @ 4Ω bridged
≤1.0% THD+N


Dynamic Power
(PVC/PowerCube®)
CTA-2006 Guidelines
CTA-2006 Dynamic Power Rating
125W x 4 + 400W x 1 @ 4Ω
200W x 4 + 700W x 1 @ 2Ω
N/A + 700W x 1 @ 1Ω
400W x 2 + N/A @ 4Ω bridged


Bridgeable
Yes


Frequency Response
10Hz - 50kHz


Input Sensitivity
150mVrms - 12Vrms


Circuit Topology Class
Class-AD (front/rear channels)
Class-BD (sub channel)


Efficiency (average)
>75%


Total Harmonic Distortion (THD+Noise)
<0.2% THD+N @ 1 Watt


Signal Input
Low-Level: 2 RCA
High-Level: 4-Pin Molex




Tone Controls
Front/Rear: 0-14dB @ 12.5kHz
Front/Rear: 0-18dB @ 45Hz
Sub: 0-18dB @ 45 Hz


Crossover Controls
High-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Infrasonic: 30 Hz @ 12dB/Octave Butterworth


Remote Controls
No


Visual Indicators
Power: Blue
Protect: Red
Input Clip: Red
Output Clip: Blue/Red


Power Wire Gauge
4 AWG


Power Input Connector
Compression Terminal Block


Speaker Wire Gauge
16 AWG


Speaker Output Connector
4-Pin Molex


Cooling
Convection


Heatsink
Extruded Aluminum


Operating Voltage
9 - 16 VDC




Max. Current Draw (13.8V Sinewave)
90 A @ 4Ω/4Ω
140 A @ 2Ω/2Ω
170 A @ 2Ω/1Ω
150 A @ 4Ω bridged




Dimensions (H x W x D)
1.7" x 4.25" x 12.3"
(42.8 mm x 108 mm x 311.4 mm)

Does not include harnesses

Estimate shipping

Recommended Products

Verify fitment with your vehicle

Search

(Change vehicle)