PRV AudioSKU: TW350Ti



The Titanium diaphragm is on a Kapton former is light, thin and durable for long play applications. The TW350Ti is perfect for DJ Cabinets, and can may be for higher SPL Requirements. The sharp smooth sound is perfect for applications where larger compression drivers may over power a venue.

TW350Ti is designed with cast aluminum frame to ensure a quality sound and long lasting play in most any environment. Replacement Diaphragms available.

Add crystal clear sparkle to any speaker with PRV Audio’s TW350Ti titanium bullet super tweeter! Not only does this driver look as good as it sounds and it’s also able to take a huge amount of power due to its 1″ diameter copper voice coil.

The PRV Audio TW350Ti Super Tweeter offers a smooth response and extremely high efficiency from mid range through high range frequencies.


  • Type: Super Tweeter
  • Nominal Impedance: 8Ω
  • Rated AES Power Handling (RMS): 60 Watts
  • Program Power: 120 Watts
  • Voice Coil Diameter: 1″


Nominal impedance 8 Ohms
Rated AES Power Handling (RMS) 60 Watts
Program Power 120 Watts
Sensitivity 2.83V at 1m 105 dB
Recommended Hi Pass Crossover**
**For Full Power Handling
5000 Hz**
**12db Per Octave Crossover
Frequency Response at -10dB 3,500 – 20,000 Hz
Voice Coil Diameter 1”(25 mm)
Voice Coil Wire CCAW
Voice Coil Former Material Kapton
Diaphragm Material Titanium
Flux Density 1.70 T
Magnet Material Ferrite



Overall Depth 2.43” (68 mm)
Mounting Depth 2.08” (53 mm)
Overall Width 3.06” (77.7 mm)
Overall Height 3.5” (89 mm)
Cutout Diameter 2.75” (70 mm)
Net Weight 1.37 lbs (0.62 kg)
Shipping Weight 1.47 lbs (0.67 kg)
Carton Dimensions W x L x H 3.86” x 3.42” x 2.75”
(98 x 87 x 70 mm)

Estimate shipping

Recommended Products

Verify fitment with your vehicle

(Change vehicle)